NEC UNIVERGE SV9300 Networking Manual page 192

A
CM08 Specify the result of Switch Hook Flash on Hot
Line station.
To allow Hot Line stations to transfer a call or
access a feature, set the data to "0".
END
To use the Delayed Hot Line-Outside feature:
START
CM12 Assign a Delayed Hotline to the required sta-
tions.
CM41 Specify the Delayed Hotline activation timer.
CM52 Define the Delayed Hotline pairs.
NOTE:
A
DESCRIPTION
DESCRIPTION
Do not assign station number with
first digit "0".
(1) 057
(2) 0 : Special Dial Tone
1 : Attendant Recall
• Y=03
(1) X-XXXXXXXX: Station No.
(2) 09: Delayed Hotline
• Y=0
(1) 119
(2) 01-30: 1-30 seconds
(1 second increment)
If no data is set, the default setting is 10 seconds.
• Y=00-99 Delayed Hotline Pair No.
(1) 0: Calling Side
(2) X-XXXXXXXX: Station No.
(1) 1: Called Side
(2) X-XXXXXXXX: Station No.
CXX
XX
1-178
Chapter 1 CCIS FEATURES
HOT LINE-CCIS
DATA
DATA
: Trunk Outgoing Call
: Abbreviated Code
exclusively for Delayed
Hotline-Outside call
assigned by CM71>65
NWA-088654-001 Rev.1.0
94ch1005.fm