NEC UNIVERGE SV9300 Networking Manual page 217

C
CM60 Allocate the ATT Group number to each
DESKCON.
NOTE:
A reset by CM60 Y=90>0: 0 is
required after this data setting.
Specify the Master DESKCON within the ATT
Group assigned by CM60 Y=00.
NOTE 1: Assign one Master DESKCON for
each ATT Group.
NOTE 2:
Even if an ATT Group consists of
only one DESKCON, specify the
DESKCON as a Master DESKCON.
NOTE 3: A reset by CM60 Y=90>0: 0 is
required after this data setting.
When providing 2nd Ringing feature on the
DESKCON, make Off-Hook Ringing effec-
tive.
NOTE:
A reset by CM60 Y=90>0: 0 is
required after this data setting.
Allow or restrict the system to keep the volume
level changed by the volume button on
DESKCON, after the call is finished.
NOTE: A reset by CM60 Y=90>0: 0 is
required after this data setting.
CM62 Specify the tenants to be handled by each ATT
Group.
NOTE: A reset by CM60 Y=90>0: 0 is
required after this data setting.
D
DESCRIPTION
MULTIPLE CONSOLE OPERATION-CCIS
• Y=00
(1) 0-7: DESKCON No.
(2) 0-3: ATT Group 0-3
• Y=01
(1) 0-7: DESKCON No.
(2) 0 : Master ATT
1 : Not Master ATT
• Y=16
(1) 0-7: DESKCON No.
(2) 0: Effective
• Y=23
(1) 0-7: DESKCON No.
(2) 0 : Allow
1 : Restricted
• Y=0-3 ATT Group 0-3
(1) 00-63: Tenant No.
(2) 0 : To handle
1 : Not handled
1-203
Chapter 1 CCIS FEATURES
DATA
NWA-088654-001 Rev.1.0
94ch1005.fm