Data Line Security-Ccis - NEC UNIVERGE SV9300 Networking Manual

DATA LINE SECURITY-CCIS

General Description
This feature allows the lines which are used for data transmission through CCIS to be protected from in-
terruptions such as Attendant Camp-On, Busy Verification-CCIS, Executive Right of Way and Attendant
Override.
Programming
START
CM13 Assign the function of Analog Data station
(Single Line Station with FAX or MODEM.)
to required stations.
NOTE:
END
Operating Procedure
No manual operation is required.
DESCRIPTION
Ringing interval depends on as follows when the second data is set as 0.
The ringing interval for the FAX station is as per the setting of ringing signal for FAX
(CM04 Y=00>09) (default: as per CM04 Y=00>05).
• Y=07
(1) X-XXXXXXXX: Station No.
(2) 0: Data station
1-146
Chapter 1 CCIS FEATURES
DATA LINE SECURITY-CCIS
DATA
NWA-088654-001 Rev.1.0
94ch1005.fm