Speed Transfer - Siemens Hicom 150 E User And Installation Manual

Consultation/Transfer/Conference

Speed Transfer

1.
or
Space Bar
2.
or
1.
or
Space Bar
2.
3.
or
+
48
Answer the call.
The call appears in the traffic display.
While still conducting the call, use the right mouse button to click
the status button for the station to which you want to transfer the
call. The station number is dialed and the call is automatically for-
warded to the station dialed.
Answer the call.
The call appears in the traffic display.
While still conducting the call, enter the number of the station you
want to reach while conducting the call and press Enter to confirm
your selection. The station number is dialed. (You can also dial the
station from the electronic directory (
Æ
dial keys ( 42).)
Connect the station by clicking the Connect button (the Clear but-
ton is replaced by the Connect button) or press the + key on the
keyboard.
If the station has not answered the call after approximately forty
seconds (can be configured by the system administrator), the call is
signaled in the call display as a recall.
Æ
76) or using the repertory