Activating External Message Waiting Indicator; External Mwi Group - Siemens HiPath 1100 Series Programming Manual

Programming an Extension
Step by Step
66
Activating External Message Waiting Indica-
tor
Activates the MWI feature for a group of extensions.
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
0 1 4
or
Activate/Deactivate an external MWI group:
* #
= To activate
*
= To deactivate (default)
#
Initial state for Programming Mode.

External MWI Group

The extensions configured for this group receive a
Message Waiting Indicator (MWI) signal from the exter-
nal Voice Mail Server.
By default, no extension is configured.
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
0 1 5
... Enter the extension numbers (e.g., 11/101) to be includ-
ed in the external MWI group.
Press this key to finalize the entry.
#
Initial state for Programming Mode.
or
Press this key to delete the extensions in the group.
*
Press this key to finalize the entry.
#
Initial state for Programming Mode.