Warning Tone For Calls Without Lcr; Programming An External Line; Groups Of External Lines - Siemens HiPath 1100 Series Programming Manual

Step by Step
*
or
0 8 9 0

Warning Tone for Calls without LCR

This feature alerts the user to the fact that the call
HiPath 1100 being made may be charged by the Carrier
at a higher rate than usual. This may be due to the
unavailability of an external line for LCR (Least Cost
Routing).
When using a standard telephone, a warning tone
indicates to the user that a different carrier is complet-
ing the call at this time. When using a system
telephone, the carrier's name will show on the display.
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
0 9 2
or
Activate/Deactivate Tone:
#
* = To activate
= To deactivate (default)
#
Initial state for Programming Mode.

Programming an External Line

Groups of external lines

Programming allows access to an external line or group
of external lines through a code other than "0."
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
5 6
a
Enter the group code number (default is 0).
8 9 9
Enter a number for an external line (e.g., 801).
Press this key.
#
Initial state for Programming Mode.
In order to use this feature the HiPath 1100 must
have been enabled for LCR (programmed via
HiPath 1100 Manager).
Programming an External Line
31