Symmetric Call; Absence Of Ack Setup For External Isdn Line; Notify - Siemens HiPath 1100 Series Programming Manual

Step by Step
*
*
*

Symmetric Call

This setting configures the system for symmetric calls.
Check with your local carrier to know which operating
mode should be configured for your system.
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
0 7 4
or Activate/Deactivate Symmetric Mode:
#
* = To activate (default)
= To deactivate
#
Initial state for Programming Mode.

Absence of ACK Setup for external ISDN Line

Check with your local carrier to know which operating
mode should be configured for your system.
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
0 7 5
or Activate/Deactivate ACK setup:
#
* = To activate
= To deactivate (default)
#
Initial state for Programming Mode.

Notify

Check with your local carrier to know which operating
mode should be configured for your system.
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
0 7 6
or Activate/Deactivate Notify:
#
* = To activate (default)
= To deactivate
#
Initial state for Programming Mode.
Programming a Digital Trunk
119