General Programming
Step by Step
78
Assigning Extensions to MOH Groups
Extensions can be grouped in two MOH groups.
No extensions configured as a default.
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
0
8 7
or
Select Group 1 or 2.
1
2
Enter the extension numbers (e.g., 11/101).
Press this key.
#
Initial state for Programming Mode.
Deleting Extensions in a Group
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
0
8 7
or
Select Group 1 or 2.
1
2
*
To delete all extensions in the group.
Press this key.
#
Initial state for Programming Mode.
Music source for a MOH Group
When an extension has a call on hold, the caller will hear
the music programmed for that extension's group.
Enter the code for programming.
0
8 8
or
Select Group 1 or 2.
1
2
...
Enter the code for a music source:
0
4
= No music (default)
0
= To activate external music source.
1
= To activate an external music source connected to
2
= To activate an internal music source.
3
= To activate an internal PCM source
4
an extension.