Associated Group; Cd Port Assignment - Siemens HiPath 1100 Series Programming Manual

Step by Step
...
0 1

Associated Group

With this feature you can assign many extensions to
one Executive telephone. There are 8 groups available
with 16 extensions for each group. A group is assigned
to each Executive telephone. To ensure proper opera-
tion all extensions must have system telephones
installed. An extension can be assigned to many groups
at the same time.
By default no Associated Groups are configured.
Required:Programming Mode must be active (*95
31994).
Enter the code for programming.
5 1
Enter an extension for the executive telephone (e.g., 11/
101).
... Specify up to 15 extensions as associated telephones
(e.g., 12/102).
Press this key.
#
Initial state for Programming Mode.
Deleting an Associated Group
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
5 1
Enter an extension for the executive telephone (e.g., 11/
101).
*
The executive telephone extension is deactivated.
Press this key.
#
Initial state for Programming Mode.

CD Port Assignment

Assigning CD ports to extension slots allows system
telephones to be connected to the PABX.
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
4 6
Enter a number from 01 to 24 for the CD port.
2 4
Programming an Extension
63