Siemens HiPath 1100 Series Programming Manual page 112

Fax/DID Module
Step by Step
112
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
2 8
Select an external line (e.g., 801) for Fax/DID Reception.
Enter the extension number for Fax Reception (e.g., 12/
102).
Enter the number for the next external line available.
or
Press this key.
#
Initial state for Programming Mode.
You must first program the extension for fax in
"Type of Equipment Connected to an Extension -
Code 003" before programming Code 28.
Deleting Fax Reception Extensions
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
2 8
Enter a number for an external line (e.g., 801) assigned
to Fax Reception.
* The Fax extension selected is removed.
If necessary, enter the number for the next external line
available.
or
Press this key.
#
Initial state for Programming Mode.