Disa Permission; Msn Disa - Siemens HiPath 1100 Series Programming Manual

Step by Step
*

DISA Permission

This setting specifies an extension for using the DISA
feature.
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
0 1 8
Enter the extension number (e.g., 11/101).
or Activate/Deactivate a DISA permission for an extension:
#
* = To activate
= To deactivate (default)
#
Enter the next extension number
or
Press this key.
#
Initial state for Programming Mode.

MSN DISA

This specifies from which MSN the DISA features will
operate.
In the default configuration no MSN is set.
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
0 1 9
Enter a MSN (up to 20 digits).
Press this key.
#
Initial state for Programming Mode.
DISA
75