Galil Motion Control DMC-18 2 Series User Manual page 54

time-out occurred while waiting for a response from the Galil controller). The default setting for the
timeout is 5000ms, which should be sufficient for most cases.
Advanced communications settings are available under the Communication Method tab to allow different methods of
communications to be utilized (shown in Fig 4.6). The version 7 (and higher) drivers and .DLL's allow for three different
methods of communications: Interrupt, Stall, and Delay.
DMC-18x2
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Figure 4.5 - General Communications Parameters Dialog
Chapter 4 - Software Tools and Communications • 43