Configuring Hardware Banks - Galil Motion Control DMC-18 2 Series User Manual

CB-50-80
End bracket
80 pin high density connector
used for extended I/O

Configuring Hardware Banks

The extended I/O on the DMC-18x2 and DB-14064 is configured using the CO command. The banks
of buffers on the IOM-1964 are configured to match by inserting the appropriate IC's and resistor
packs. The layout of each of the I/O banks is identical.
For example, here is the layout of bank 0:
188 ● Appendices
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Error LED
DMC-17x8
End bracket
100 pin high density connector J1
used for motion I/O
DMC-18x2