Displaying The Number With Increased Decimal Places For Float-Type Variables - ICP DAS USA iKAN Series User Manual

4.3.2. Displaying the Number with Increased Decimal Places for Float-Type Variables

The number of the decimal places to be used for a float-type variable can be set from the FLOAT
VARIABLES page. The offset value is 40128, which means variable 0 is equal to 40128 and variable
2 is equal to 40130, and so on.
For example, the following explains how to set the number of decimal places for float-type
variable 40130.
This example is a continuation of the example in section 4.2.3.
1. Click the address 130 option, and then click the Adv. Config button
2. From the Decimal Places drop-down menu, select the desired number of decimal places to be
used, and then click the Update button