Using Modbus Tcp Command To Configure The Ikan Display - ICP DAS USA iKAN Series User Manual

3.2.2.2. Using Modbus TCP Command to configure the iKAN display

Before using the Modbus TCP Command tool, iKAN must be configured in Modbus configuration
mode. For more information on how to set the iKAN display in Modbus configuration Mode, please
refer to Appendix A.1. How to set the iKAN display in Modbus Configuration Mode.
1. Select the Modbus TCP Master from the Tools menu
2. Enter the IP address and the Port number in the respective text fields and then click the Connect
button