Connecting To The Power And Pc - ICP DAS USA iKAN Series User Manual

2.3. Connecting to the Power and PC

The iKAN display has two standard Ethernet ports (RJ-45) which provide access to the iKAN with a
PC. To configure the iKAN through the PC, you must establish a connection between the iKAN and
a PC.
1. Connect the power to the iKAN
i. Verify that input power to the external power supply is turned off.
ii. Connect a 240 VAC+ terminal on the power supply to the Vs+ terminal on the iKAN
iii. Connect a 240 VAC- terminal on the power supply to the GND terminal on the iKAN
2. Connect the Ethernet cable to the printer port, and then connect the other end of the cable to
an available port on the network router, switch, or hub
Hub/Switchde
Power Supply
+24V
GND
Ethernet Port
Vs+
GND