Displaying A Value With An Increased Number Of Decimal Places For Float-Type; Variables - ICP DAS USA iKAN Series User Manual

4.3.2. Displaying a Value with an Increased Number of Decimal Places for Float-type

Variables

The number of the decimal places to be used for a float-type variable can be set from the FLOAT
VARIABLES page. The offset value is 40128, which means variable 0 is equal to 40128 and variable
2 is equal to 40130, and so on. A maximum of three decimal places can be set.
For example, the following explains how to set the number of decimal places for float-type
variable 40130.
Note that this example is a continuation of the example given in Section 4.2.3.
1. On the FLOAT page, click the option for address 130, and then click the Adv. Config button
2. From the Decimal Places drop-down menu, select the desired number of decimal places to be
used, and then click the Update button
iKAN Series Display User Manual v 1.0.1 Page: 94