Displaying The Value Of A Coil Variable With The Replacement Text - ICP DAS USA iKAN Series User Manual

4.3.3. Displaying the Value of a Coil Variable with the Replacement Text

The contents of a coil variable can be either 0 or 1, which is usually used to indicate the status of
the Digital Output, i.e., ON or OFF.
Click the address number of the coil variable which you would like to configure. The configuration
area has been registered according to the selected address number.
iKAN series devices provide a string mapping function that allows the value of the coil variable to
be mapped in order to make the coil value more meaningful when reading the message. The text
mapping function allows a maximum of 10 Unicode characters or 30 ASCII characters to be
entered to represent a value of 0 or 1.