4.3.1. Displaying the Mapping Data for Integer-type Variables
Most industrial measuring devices use 16-bit integers to convert a value from a data source to a
real physical value, such as the voltage, temperature, or relative humidity, etc. For example, using
the range -32768 to 36767 to convert to -10V to +10V. The iKAN series device is able to perform
data mapping to translate an integer value that has been read from a remote data source to a
readable physical value.
For example, the following explains how to configure the data mapping function for an integer-
type variable at address 1.
This example is a continuation of the example in section 4.2.2.
1. Click the address 1 option, and then click the Adv. Config button