Using Modbus Rtu Command To Configure The Ikan Display - ICP DAS USA iKAN Series User Manual

3.2.2.1. Using Modbus RTU Command to Configure the iKAN display

Before using the Modbus RTU Command tool, iKAN must be configured in Modbus configuration
mode. For more information on how to set the iKAN display in Modbus configuration Mode, please
refer to Appendix A.1. How to set the iKAN display in Modbus Configuration Mode.
1. Select the Modbus RTU Master from the Tools menu
2. Select the COM Port and Baud Rate from the respective drop-down menus, and then click the
Open button