Web Interface - ICP DAS USA iKAN Series User Manual

3.1. Web Interface

The iKAN display has a built-in web interface. It provides lots of functions needed to manage all
message displayed in iKAN as well as to set up parameters, variables and operation behavior.
Most of the common operations can be done by using the iKAN Web Interface.
The following table lists the major function of the web interface and provides a link to more
information about the function.
Menu
MESSAGE POOL
DATA POOL
SYSTEM
Sub-Menu
-
INTEGER
FLOAT
COIL
IMPORT/EXPORT
ETHERNET
SERIAL PORT
MISC.
This menu is used to
Edit and message messages.
Specify a value to a variable and
define the data type mappings
Import/Export pre-configured
messages
Set the network address.
Set the network address of the DL-
302.
Set the communication parameters
of the serial port
Assign a Modbus address to the iKAN
display.
Adjust the LED Brightness.
Adjust the message moving speed.
Reset the iKAN display to factory
default settings.
Adjust the LED Brightness.
Reset the iKAN display.
Check the firmware information.
Refer to section
3.1.1
4.1
4.2
3.1.2
4.2
4.3
3.1.3
3.1.4
3.1.5
3.1.6
3.1.7
3.1.8
3.1.9
3.1.10
3.1.11
3.1.12
3.1.13