Table of Contents
Advertisement
4.3.2. Displaying a Value with a Specified Number of Decimal Places for Float-type
Variables
The number of the decimal places to be used for a float-type variable can be set from the FLOAT
page. The offset value of Modbus address for float-type variables is 40128, which means variable
0 uses address 40128 and variable1 uses address 40130, and so on. A maximum of three decimal
places can be set.
For example, the following explains how to set the number of decimal places for float-type
variable 40130.
Note that this example is a continuation of the example given in Section 4.2.3.
1. On the FLOAT page, click the option for address 130, and then click the Adv. Config button
Modbus Address
Value of variable
Change the value
Change the color for displaying the value on the iKAN
iKAN Series Display User Manual
v 1.1.0
Page: 107
Advertisement
Table of Contents
