2.4. Connecting the iKAN to a Network
The factory default IP address for each iKAN device is 192.168.255.1.
Before integrating an iKAN series display into your network, you should configure the IP, Mask, and
Gateway addresses for the device by setting the values that are valid for your network system.
The eSearch Utility is developed for searching ICP DAS Ethernet I/O modules based-on MiniOS7
which are connected to the same subnetwork as the Host PC, configuring the Ethernet parameters
such as IP address, subnet mask and gateway etc., or updating firmware.
1. Get the latest version of the eSearch Utility
The eSearch Utility can be obtained from:
http://ftp.icpdas.com/pub/cd/tinymodules/napdos/software/esearch/
2. Launch the eSearch utility and click the Search Server button