Increasing The Decimal Places For The Number Of Float-Type Variable - ICP DAS USA iKAN Series User Manual

3.1.2.2. Increasing the Decimal Places for the Number of Float-Type Variable

The number of the decimal places to be used for a float-type variable can be set from the FLOAT
VARIABLES page. The offset value is 40128, which means variable 0 is equal to 40128 and variable
2 is equal to 40130, and so on.
For more detailed information on how to increase the decimal places for the number of float-type
variable, please refer to section "4.3.2. Displaying the Number with Increased Decimal Places for
Float-Type Variables"