ICP DAS USA iKAN Series User Manual page 101

For example, the following explains how to configure the text mapping for the Coil variable at
address 1. This example is a continuation of the example in section 4.2.4.
1. Click the address 1 option, and then click the Adv. Config button
2. Enter the following mapping text, and then click the Update button
i. In the ON Text column, enter the mapping text in the text field for when the status of the
coil-type variable is set to ON status.
ii. In the OFF Text column, enter the mapping text in the text field for when the status of the
coil-type variable is set to OFF status.