Table of Contents
Advertisement
The number of decimal places that will show on the display.
Integer
This function is used to change integer-type value and configuration.
No.:
The integer type variable which will be configure. The iKAN-XXX-CPS supports to
control 32 integer type variables.
Color:
The color of the integer-type value which the users would like to show on the
display.
Value:
It is a integer -type value which the users would like to show on the display.
Advanced setting:
Perform data mapping to translate an integer value that has been read from a
remote data source to a readable physical value.
For example, to convert a 16‐bit unsigned integer (0 to 65535) to the voltage 0 to
10 V, set the following arguments:
Argument
Source Low
Target High
Source Low
Target High
Decimal
Value
Description
0
The minimum value of the integer
0
The minimum value of the physical value
65535
The maximum value of the integer
10
The maximum value of the physical value
1
The number of decimal places to be used
for the converted value
Advertisement
Table of Contents
