Table of Contents
Advertisement
2. Click the
button
3. In the No. 1 form, specify the following parameters:
i. Check the Display Status checkbox
ii. Select the desired color from the Color drop-down menu
iii. Enter the following string in the Message text field:
CO2: %y021 PPM, Temp: %y023
iv. Click the Update button
CO2: %y021 PPM, Temp: %y023
The IP address for the iKAN series device will be shown on the display.
CO2: 7 0 2 P P M , T e m p : 2 5 °C
Advertisement
Table of Contents
