ICP DAS USA iKAN Series User Manual page 150

5.7. Demo
For more easily operate the iKAN-XXX-CPS module, we provide the demo program and show how
to control iKAN series via CANopen protocol. The demo is drove by Virtaul CAN driver. Thus, before
using this demo, please install Virtual CAN driver first. Virtual CAN is a technique which is used to
simulate CAN ports on PC via Virtual CAN driver. Most of CAN converters in ICP DAS support Virtual
CAN technique.
Virtual CAN driver:
http://www.icpdas.com/root/product/solutions/industrial_communication/fieldbus/can_bus/oth
er/vxcan_driver.html
The operation interface is as below.

Open CAN/Close CAN
After executing the demo, the demo will search CAN converters of ICP DAS automatically and
then list them as virtual CAN ports. If the PC does not install any CAN converters of ICPDAS,
the List will show nothing.