Connecting To A Remote Dl-302 Device - ICP DAS USA iKAN Series User Manual

3.1.5. Connecting to a remote DL-302 device

The iKAN series devices can be used to display data such as the temperature, humidity and CO2
values sourced from a specific remote DL-302 device that is connected to the same network as the
iKAN device.
Once the IP address for the DL-302 device has been configured, the data recorded by the DL-302
can be automatically obtained. To specify the IP address of the required DL-302 device, follow the
instructions given below.
1. Click the SYSTEM menu, and then click the ETHERNET menu
2. Enter the IP address for the desired DL-302, and then click the Update Settings button