Assembling The Ikan; One Piece Of Ikan Display Installation - ICP DAS USA iKAN Series User Manual

2.2. Assembling the iKAN

Before installation, make sure that surface dedicated for installation is suitable to support weight
of given device. We do not recommend soft and fragile surfaces, such as polystyrene foam, mineral
wool, plaster boards and wooden walls with a thickness of less than 30mm, etc.

2.2.1. One Piece of iKAN Display Installation

Fasten the left and right mounting plates to the iKAN display with 8/16 supplied screws each side.
iKAN-116S/iKAN-124
iKAN-208