Web Interface - ICP DAS USA iKAN Series User Manual

3.1. Web Interface

The iKAN display contains a built-in web interface that provides a range of functions needed to
manage all messages displayed on the iKAN, as well as to set up the parameters, variables, and
operational behavior. The majority of common operations can be carried out using the iKAN Web
Interface.
The following is an overview of the major functions of the web interface, and provides a link to
more information about the function.
Menu Sub-Menu
MESSAGE
-
POOL
INTEGER
DATA POOL FLOAT
COIL
IMPORT/EXPORT
ETHERNET
SERIAL PORT
SYSTEM
MISC.
iKAN Series Display User Manual
This menu is used to
Allows you to edit and manage messages.
Allows you to specify a value for a variable and
define the data type mapping
Allows you to import/export pre-configured
messages
Allows you to set the network address.
Allows you to set the communication
parameters for the serial port
Allows you to assign a Modbus address to the
iKAN display.
Allows you to adjust the brightness of the LED.
Allows you to adjust the speed at which a
message moves.
Allows you to reset the iKAN display to the
factory default settings.
Allows you to adjust the brightness of the LED.
Allows you to reset the iKAN display.
Allows you to assign a Modbus address to the
iKAN display.
v 1.0.1 Page: 36
Refer to
section
3.1.1
4.1
4.2
3.1.2
4.2
4.3
3.1.3
3.1.4
3.1.5
3.1.6
3.1.7
3.1.8
3.1.9
3.1.10
3.1.11
3.1.12