Web Interface - ICP DAS USA iKAN Series User Manual

3.1. Web Interface

The iKAN display contains a built-in web interface that provides a range of functions needed to
manage all messages displayed on the iKAN, as well as to set up the parameters, variables, and
operational behavior. The majority of common operations can be carried out using the iKAN Web
Interface.
The following is an overview of the major functions of the web interface, and provides a link to
more information about the function.
Menu Sub-Menu
MESSAGE
-
POOL
INTEGER
DATA
FLOAT
POOL
COIL
DIO -
DL Status -
IMPORT/EXPORT
ETHERNET
SYSTEM
SERIAL PORT
MISC.
iKAN Series Display User Manual
This menu is used to
Allows you to edit and manage messages.
Allows you to specify a value for a variable and
define the data type mapping
Allows you to control the DO and read the status
of DI/DO channels
Allows you to get the information regarding
connection status, real-time data and Modbus
address for measured substance on the DL/CL
series module.
Allows you to import/export pre-configured
messages and variables.
Allows you to set the network address and add
DL/CL series modules connected via Ethernet.
Allows you to set the communication
parameters for the serial port and add DL/CL
series modules connected via RS-485.
Allows you to adjust the brightness, moving
speed, or reset the device.
v 1.1.0 Page: 37
Refer to
section
3.1.1
4.1
4.2
3.1.2
4.2
0
3.1.5
3.1.4
5
3.1.5
3.2.1
3.1.5
3.2.2
3.1.5
3.2.3
3.1.5
3.2.4