Storage - FujiFilm PB-30 Operation Manual

Chapter 11 Storage and Maintenance

11.2 Storage

66
Store in a state in which no force is applied to the tube. Do not store
in locations that do not satisfy the storage conditions. Otherwise,
equipment failure may occur.
Store this product in a location that satisfies the following storage conditions.
Sterilize the tube and filter before storing them.
Store the tube, filter and cable where they are not subject to an excessive force.
Storage Conditions
Temperature : -10 to +45°C
Humidity : 30 to 95%RH (no dew condensation)
Pressure : 70 to 106 kPa (within range of atmospheric pressure)
The equipment will wear out and degrade after repeated use for a long period. Have it
checked by specialists once every six months or once every 100 cases, whichever comes
first.
Also have it checked if there is anything wrong with the equipment.
[Note] The filter and tube are consumable supplies. Replace them with new ones once a
month or once every 10 cases, whichever comes first.
CAUTION