Installation And Operation Of Foot Switch - FujiFilm PB-30 Operation Manual

Chapter 6 Preparation and Inspection

6.6 Installation and Operation of Foot Switch

Connect the connector of the foot switch (FS1) to the foot
switch terminal of the main unit.
44
The balloon can be controlled with the optional foot switch (FS1) connected to the foot
switch terminal.
Gray Switch (Gray) : The function of this switch is the same as that of the toggle switch 1
of the remote switch.
Pressing of this switch toggles between air supply and discharge to/
from the balloon on the over-tube side.
Black Switch (Black) : The function of this switch is the same as that of the toggle switch 2
of the remote switch.
Pressing of this switch toggles between air supply and discharge to/
from the balloon on the endoscope side.
[Note] Even when the foot switch is connected, the remote switch can be used.