FujiFilm PB-30 Operation Manual page 21

3.3.2 TY-400 and TY-500
1
Filter
1
If the balloon is broken, body fluid that flows backwards is trapped here.
Rubber plate
2
This plate integrates the tubes to prevent cross connection of the tube on the over-tube side
and that on the endoscope side.
Install this plate so that the letters on the plate are in the correct direction.
Tube 2 (Endoscope side)
3
This tube is used to connect the main unit and endoscope.
Tube 1 (Over-tube side)
4
This tube is used to connect the main unit and the over-tube.
Label for tube identification
5
This label identifies the tube 1 and tube 2.
The tube 1 is used on the over-tube side. The tube 2 is used on endoscope side.
2
5
TY-400 [Note] Optional accessory
2
1
3
4
Chapter 3 Name and Function of Each Part
4
TY-500 [Note] Optional accessory
3
21