<Back Panel>
8
7
6
Remote terminal
1
The cable of the remote switch is connected to this terminal.
S video terminal
2
A component signal separated into a Y signal for brightness and a C signal for color is
output.
An external monitor to graphically show the balloon conditions is connected to this
terminal.
[Note] Use the cable CC2-901, CC2-903, CC3-601, CC3-603 or CC3-608 to connect an
Video output terminal
3
An external monitor to graphically show the balloon conditions is connected to this
terminal.
[Note] Use the cable BNC-01, BNC-03 or BNC-05 to connect an external monitor.
Chapter 5 "Graphic Display"
external monitor.
Chapter 5 "Graphic Display"
Chapter 3 Name and Function of Each Part
1
2
3
4
5
15