Removing Pb-30 - FujiFilm PB-30 Operation Manual

7.3 Removing PB-30

Remove the tube kit from the endoscope.
<In the case of TY-04 and TY-400>
(1) Rotate the tube counterclockwise to disconnect it from the
balloon air feed inlet of the endoscope and the over-tube's
air feed inlet.
<In the case of TY-06 and TY-500>
(1) Detach the tube from the balloon air feed inlet of the
endoscope while holding down the arms of the tube kit.
(2) Remove the tube kit from the over-tube.
[Note]
Dispose of the removed over-tube.
(3) Remove the waterproof sheet used for wrapping the
remote switch and dispose of the sheet.
Chapter 7 How to Use the Equipment
In case of TY-04 and TY-400
In case of TY-06 and TY-500
49