Sterilizing Tube Kit - FujiFilm PB-30 Operation Manual

Chapter 10 Sterilization

10.2 Sterilizing Tube Kit

(1) Dry out the tube kit completely.
(2) Put the tube kit in a sterile pack, and then seal the sterile
pack tightly. See the operation manual of sterile pack for
sealing up.
(3) After putting the tube kit packed inside the sterile
pack into the pre-vacuum steam sterilizer, follow
the instructions provided by the manufacturer of the
pre-vacuum steam sterilizer as well as specific sterilization
parameters described in this manual.
For recommended pre-vacuum steam sterilization
parameters, refer to "10.3 Autoclave" in this operation
manual.
(4) Store it according to "11.2 Storage."
62
[Note] Prior to steam sterilization, ensure that the tube kit has been thoroughly cleaned
following the instructions provided.