Connecting Pb-30 And The Endoscope - FujiFilm PB-30 Operation Manual

Chapter 6 Preparation and Inspection
(5) Connect the remote switch with the indicator on the RC
connector facing up into the remote terminal of the main
unit, and secure it by rotating the outer ring clockwise.
(6) Place the remote switch in a place in which it can be
operated easily.
(7) Insert the power plug of this product into the peripheral
receptacle on the cart.

6.4 Connecting PB-30 and the Endoscope

(1) Wear disinfected or sterilized gloves.
(2) Connect the tube 2 (endoscope side) of the tube kit to the
endoscope.
<In the case of TY-04 and TY-400>
Insert the connector of the tube into the balloon air feed
inlet of the endoscope, and rotate the connector clockwise
to secure it.
<In the case of TY-06 and TY-500>
Insert the connector of the tube into the balloon air feed
inlet of the endoscope.
36
[Note] For details on how to attach the over-tube and the balloon, refer to the operation
manual of the over-tube and that of endoscope.
In case of TY-04 and TY-400
In case of TY-06 and TY-500