Remote Switch (Rc-30) - FujiFilm PB-30 Operation Manual

Balloon controller
Table of Contents

Advertisement

3.2 Remote Switch (RC-30)

3.2.1 Name and Function of Each Part of Remote Switch
Toggle switch 1 (White: Over-tube side)
1
This switch toggles between air supply and air discharge to/from the balloon on the
over-tube side.
When the power is turned on, the inside light turns on and air is discharged from the
balloon.
When this switch is pressed while the inside light is on, the outside light turns on and air is
supplied to the balloon. When this switch is pressed while the outside light is on, the inside
light turns on and air is discharged from the balloon.
[Note] This switch is disabled if the balloon switch 1 on the main unit is off.
5
6
Chapter 3 Name and Function of Each Part
1
2
3
4
17

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents