Chapter 3 Name And Function Of Each Part; Main Unit (Pb-30) - FujiFilm PB-30 Operation Manual

Chapter 3 Name and Function of Each Part

3.1

Main Unit (PB-30)

<Front Panel>
8
7
6
Power button
1
This switch is used to turn on/off the power.
When the power is on, the green LED on the left side is lit.
Display mode toggle switch
2
This switch is used to toggle between "pressure value display mode" and "pressure indicator
display mode."
Balloon switch 2 (Black: Endoscope side)
3
This switch is used to start/stop supplying air to or discharging air from the balloon on the
endoscope side.
When this switch is pressed while the green light is off, the light turns on and air discharge
starts. To start air supply, use the remote switch.
When this switch is pressed while the green light is on, the light turns off and air supply or
discharge stops.
5
Chapter 3 Name and Function of Each Part
1
2
3
4
13