Chapter 3 Name and Function of Each Part
3.4 Foot Switch (FS1) [Note] Optional Accessory
Gray switch (Gray)
1
Black switch (Black)
2
Connector
3
22
1
This switch is used to supply or discharge air to/from the balloon on the over-tube side.
When the power is turned on, air is discharged from the balloon. When this switch is
pressed once, air is supplied to the balloon. When this switch is pressed once again, air is
discharged from the balloon.
[Note] This switch is disabled if the balloon switch 1 on the main unit is off.
This switch is used to supply or discharge air to/from the balloon on the endoscope side.
When the power is turned on, air is discharged from the balloon. When this switch is
pressed once, air is supplied to the balloon. When this switch is pressed once again, air is
discharged from the balloon.
[Note] This switch is disabled if the balloon switch 2 on the main unit is off.
This connector is connected to the foot switch terminal of the main unit.
2
3