Preface - Siemens SIMATIC HMI Mobile Panel 277 RO Operating Instructions Manual

Preface

Purpose of the operating instructions
These operating instructions provide information based on the requirements defined by DIN
EN 62079 for mechanical engineering documentation. This information relates to the place of
use, transport, storage, mounting, use and maintenance.
These operating instructions are intended for the following user groups:
● Operators
Operators operate and monitor the system during the process control phase. The
following chapters are relevant to the operator:
– Overview
– Operator controls and displays
– Configuring the operating system
– Using RemoteOperate Client
– Backing up and restoring data
● Commissioning engineers
Commissioning engineers integrate the HMI device into the system and ensure the
operating capability of the device for the process control phase.
The entire set of operating instructions is relevant to commissioning engineers in
principle.
Depending on the use of the HMI device, however, certain chapters may not be relevant
to them, e.g., the chapter on "Maintenance and care".
● Service technicians
Service technicians rectify faults that occur during the process control phase.
The entire set of operating instructions is relevant to service technicians in principle.
Depending on the use of the HMI device, however, certain chapters may not be relevant
to them, e.g., the chapter on "Maintenance and care".
● Maintenance technicians
Maintenance technicians carry out regular maintenance work during the process control
phase.
The chapter on "Maintenance and care" is relevant to maintenance technicians.
All user groups must pay special attention to the chapter on "Safety instructions and general
notes".
Basic knowledge required
General knowledge of automation technology and process communication is needed to
understand the operating instructions.
It is also assumed that those using the manual have experience in using personal computers
and knowledge of Microsoft operating systems.
Scope of the operating instructions
These operating instructions apply to the SIMATIC Mobile Panel 277 RO HMI device in
combination with the RemoteOperate V4 software.
Mobile Panel 277 RO
Operating Instructions, 10/2015, A5E36824256-AA
3