Functions - Siemens SIMATIC ET 200SP Manual

Product overview

2.2 Functions

2.2 Functions
Introduction
The interface module supports the following PROFINET IO functions:
● Integrated switch with 2 ports
● Supported Ethernet services: ping, arp, network diagnostics (SNMP: MIB2, LLDP-MIP
and MRP-MIB)
● Port diagnostics
● Deactivating of ports
● Minimum update time 1 ms
● Media redundancy MRP
● Device replacement without programming device
● Reset to factory settings via PROFINET IO
● Firmware update via PROFINET IO
The interface module supports additional functions:
● Identification data I&M 0 to 3
● Device replacement with and without topological configuration
● Configuration control (option handling)
Requirements
Configuration takes place with GSDML or STEP 7 V13/HSPxyz.
Cabling with fixed connection setting
If you set a fixed connection setting of the port in STEP 7, you must also disable
"Autonegotiation/Autocrossover".
You can find more information on this topic in the STEP 7 online help and
● As of STEP 7 V12, in the function manual PROFINET with STEP 7 V13
(http://support.automation.siemens.com/WW/view/de/49948856/0/en)
● As of STEP 7 V5.5, in the system manual PROFINET System Description
(http://support.automation.siemens.com/WW/view/en/19292127).
10
IM 155-6 PN BA interface module (6ES7155-6AR00-0AN0)
Manual, 03/2015, A5E34934425-AA