Introduction; Purpose Of The Manual; Additional Resources; Document And Software Version - Danfoss EtherNet/IP Midi Drive FC 280 Programming Manual

Introduction

1 1
1 Introduction

1.1 Purpose of the Manual

The EtherNet/IP Programming Guide provides information
about configuring the system, controlling the frequency
converter, accessing parameters, programming, and
troubleshooting.
The programming guide is intended for use by qualified
personnel familiar with the VLT
EtherNet/IP technology, and with the PC or PLC used as a
master in the system.
Read the instructions before programming and follow the
procedures in this manual.
®
VLT is a registered trademark.
CIP™ is a registered trademark.
EtherNet/IP™ is a trademark of ODVA, Inc.

1.2 Additional Resources

Resources available for the frequency converter and
optional equipment are:
•
The VLT® Midi Drive FC 280 Operating Guide
provides the necessary information to get the
frequency converter up and running.
•
The VLT® Midi Drive FC 280 Design Guide provides
detailed information about capabilities and
functionality to design motor control systems.
•
The VLT® Midi Drive FC 280 Programming Guide
provides more details on working with
parameters and many application examples.
Supplementary publications and manuals are available
from Danfoss. See drives.danfoss.com/knowledge-center/
technical-documentation/ for listings.

1.3 Document and Software Version

This manual is regularly reviewed and updated. All
suggestions for improvement are welcome. Table 1.1 shows
the document version and the corresponding software
version.
Edition
MG07H1xx
Table 1.1 Document and Software Version
2
EtherNet/IP
®
frequency converter, with
Remarks
The first edition of this manual.
Danfoss A/S © 06/2016 All rights reserved.

1.4 Product Overview

This programming guide relates to the EtherNet/IP interface
®
for VLT Midi Drive FC 280.
The EtherNet/IP interface is designed to communicate with
any system complying with the CIP EtherNet/IP standard.
EtherNet/IP provides users with the network tools to
deploy standard Ethernet technology for manufacturing
applications while enabling internet and enterprise connec-
tivity.
The EtherNet/IP control cassette is intended for use with
®
VLT Midi Drive FC 280.

1.5 Approvals and Certifications

More approvals and certifications are available. For more
information, contact a local Danfoss partner.
Software
version
2.17
MG07H102