Symbols, Abbreviations, And Conventions - Danfoss EtherNet/IP Midi Drive FC 280 Programming Manual

Introduction
1.6 Symbols, Abbreviations, and
Conventions
Abbreviation Definition
API Actual packet interval
CC Control card
CIP™ Common industrial protocol
COS Change of state
CTW Control word
DHCP Dynamic host configuration protocol
EIP EtherNet/IP
EMC Electromagnetic compatibility
FC Frequency converter
I/O Input/output
IP Internet protocol
LCP Local control panel
LED Light emitting diode
LSB Least significant bit
MAR Major recoverable fail
MAU Major unrecoverable fail
MAV Main actual value (actual output)
MIR Minor recoverable fail
MSB Most significant bit
MRV Main reference value
N/A Not applicable
ODVA Open DeviceNet Vendors Association
PC Personal computer
PLC Programmable logic controller
PNU Parameter number
REF Reference (= MRV)
RTC Real-time clock
STP Spanning tree protocol
STW Status word
Table 1.2 Symbols and Abbreviations
Conventions
Numbered lists indicate procedures.
Bullet lists indicate other information and description of
illustrations.
Italicized text indicates:
•
Cross-reference.
•
Link.
•
Parameter name.
•
Parameter group name.
•
Parameter option.
All dimensions in drawings are in mm (in).
MG07H102
Programming Guide
Danfoss A/S © 06/2016 All rights reserved.
1 1
3