Alpha Technologies AMPS HP2 Power System Installation & Operation Manual page 86

minder to check the T2S log file. It is recommended to download and view the log file for any possible problems.
Downloading the log file will also clear the alarm.
To check the T2S log file:
1. Determine which T2S is the source of the alarm. Go to Power System > Inverter System> Live Alerts and
look for the Check Log File alarm in the list. Whenever the Check Log File alert is active, the System Error
alarm will also be active. The Check Log File alert will be shown with the serial number of the T2S that is
causing the alert.
2. Go to Power System > Inverter System > Inventory > T2Ss and click on the details icon of the T2S
identified in the previous step.
3. In the T2S Expert Operations table click the Get Log File from T2S button. This will initiate a transfer of the
log file from the T2S.
4. Once the log file has been received, click Download to save the file to your computer.
5. Open the file and look for any event entries that might indicate a persistent issue. For example, module
failures or communication problems. These problems may indicate the need to replace a module or inspect
communication wiring.
Once the log file has been transferred from the T2S, the System Error alarm will clear.
84
0260080-J0 Rev D