Alpha Technologies AMPS HP2 Power System Installation & Operation Manual page 3

Table of Contents

NOTE:

Photographs contained in this manual are for illustrative purposes only. These pho-

tographs may not match your installation.

NOTE:

Operator is cautioned to review the drawings and illustrations contained in this

manual before proceeding. If there are questions regarding the safe operation of this

powering system, contact Alpha Technologies or your nearest Alpha representative.

NOTE:

Alpha shall not be held liable for any damage or injury involving its enclosures,

power supplies, generators, batteries, or other hardware if used or operated in any

manner or subject to any condition not consistent with its intended purpose, or is

installed or operated in an unapproved manner, or improperly maintained.

For technical support, contact Alpha Technologies:

nologies.

No part of this documentation shall be reproduced, stored in a retrieval system, translated, transcribed, or

transmitted in any form or by any means manual, electric, electronic, electromechanical, chemical, optical, or

otherwise without prior explicit written permission from Alpha Technologies.

This documentation, the software it describes, and the information and know-how they contain constitute the

proprietary, confidential and valuable trade secret information of Alpha Technologies, and may not be used

for any unauthorized purpose, or disclosed to others without the prior written permission of Alpha Technolo-

gies.

The material contained in this document is for information only and is subject to change without notice.

While reasonable efforts have been made in the preparation of this document to assure its accuracy, Alpha

Technologies assumes no liability resulting from errors or omissions in this document, or from the use of the

information contained herein. Alpha Technologies reserves the right to make changes in the product design

without reservation and without notification to its users.

0260080-J0 Rev D

AMPS HP2 Power Systems

Canada and USA: 1-888-462-7487

International: +1-604-436-5547

Table of Contents

Need help?

Do you have a question about the AMPS HP2 Power System and is the answer not in the manual?