T2S Inverter Control Card; Figure 40 - T2S Front Panel - Alpha Technologies AMPS HP2 Power System Installation & Operation Manual

6.3 T2S Inverter Control Card

The CXC HP unified system controller monitors and manages inverter modules by communicating with the T2S
inverter control card. The T2S may be useful in troubleshooting inverter alarms.
LEDs 1 through 3 on the front panel of the T2S indicate the following alarm conditions:
• Major Alarm LED
• Minor Alarm LED
NOTE: USB port functionality is disabled
as of T2S software version 2.91. The
T2S can be accessed from the CXC HP
with current software versions.
Access to locking latch. To remove T2S
from Inverter shelf, insert a small flat
screwdriver and gently press up on the
latch, then pull out the T2S�
60
Major alarm LED
Minor alarm LED
USB port
Figure 40 — T2S front panel
0260080-J0 Rev D