GRAPHTEC CUTTING PRO FC2250 Series User Manual page 3

Safety Precautions
During a plotting or cutting operation, do not touch
the writing panel, carriage, and other moving parts.
•
Such action may cause human injury.
No touching
Even when the plotter is stopped, it may suddenly
start operating if it receives data, so be sure to keep
your hands, hair, and so forth away from the vicinity
of the plotter's writing panel and moving parts such as
the pen carriage.
•
Such action may cause human injury.
No touching
Do not connect the plotter to a non-rated power
supply.
•
Use of a different supply voltage may result in electrical shock
or a fire hazard due to current leakage.
Use prohibited
If the plotter generates smoke, is too hot, emits
strange odor, or otherwise functions abnormally, do
not continue using it. Turn off its power and unplug
its power cord from the electrical socket.
•
Use of the plotter in such status may result in a fire hazard or
electrical shock.
•
After confirming that smoke is no longer being generated,
contact your sales representative or nearest Graphtec vendor
to request repair.
•
Never try to perform repair yourself.
Repair work by inexperienced
personnel is extremely dangerous.
Prohibited
ii
Safety Precautions
During a plotting or cutting operation, be sure to
keep your hands, hair, and so forth away from the
writing panel, carriage, and other moving parts.
•
Such action may cause human injury.
Make sure that the plotter is grounded.
•
If the plotter is not grounded, the operator could suffer an
electrical shock in case of current leakage.
Ground the Plotter
Do not use the plotter in a location where it will be
exposed to water, rain or snow.
•
Such location may cause electrical shock or a fire hazard due
to current leakage.
Do not disassemble, repair, or remodel the plotter.
•
Such action may cause electrical shock or a fire hazard due
to current leakage.
•
Contact with the high-voltage parts within the plotter may
cause electrical shock.
•
If the plotter requires repair, contact your sales representative
or nearest Graphtec vendor.
No disassembly
No touching
Avoid water
Beware of
electrical shock